Product Details:
Minimum Order Quantity | 01 Piece |
Usage/Application | Office Use |
Type | Ceiling Mounted |
Brand | Karmyogi Cooling Industries |
Capacity | as per standard |
Material | Aluminium |
IP Ratting | IP20 |
Unit Casing
Top cover material, base material, side panel material, back cover, top cover for plenum, side cover for plenum and plenum box insulation- powder coated Single Skin Galvanized Steel, Galvanized iron, Stainless Steel,
Casing is internally lined with 6mm closed cell elastomeric foam insulation
Options:
Double skin FCU with Casing made of 0.8mm Galvanized Steel, Galvanized iron with 15 mm puff injected
Decorative FCU, Suitable for wall or ceiling mounting.
Cooling coil:
Fabricated from copper tubes hydraulic bonded pressure at 2000 psig with aluminum fins and are leak tested at 350 psig nitrogen pressure.
Copper Pipe
tube OD : 3/8”, ½”
Fin
Thickness: 0.15 mm
Fin Pitch: 10-14 FPI
TYPE: LOUVERED TYPE ZIG ZIG PATTERN AL-FIN
BLOWER-
Fans are forward cured centrifugal type of double inlet, statically and dynamically balanced to ensure quiet operation.
Blower material-
Type: DIDW Forward cured centrifugal fan
Material-Galvanized steel
MOTOR-
Type: single phase/ three phase capacitor type
Safety: Flame proof and non-flame proof
Power- 220-240/50 Hz
Insulation: B
PROTECTION GRADE: IP20
Air Filter:
All units are provided with 25 mm Aluminium Mesh filter as a standard option. Filters accessible from rear end of the unit and is easily removable by pulling out from unit frame.
Filter frame-Aluminum alloy
Material: Double layer aluminum
Thickness: 25 mm
EU-2 FILTER GRADE AS PER EN779
DRAIN TRAY:
They are fabricated from heavy gauge galvanized steel and are insulated to prevent condensation. Powder coated on both side to RAL 9002.
Material: Galvanized steel
Thickness: 0.8 mm
Insulation material: PE,3 mm
Water Outlet: ¾” NB
Powder coated to RAL 9002
Standard Features
Extra Low Noise Due To Lower Rpm With Larger Dia Fan Wheels
Statically And Dynamically Balanced Forward Cured Centrifugal
High Effciency Coils With Slit Fin Design
Most Compact Design With Only 251 Mm Height Across The Range
Blue Fin Coated Coils To Withstand Corrosie Climates
Simple Design With Easy Serice Abilty
Optional Feature
Back Or Bottom Surface Plenum With Filter
3 Row/ 4 Row Cooling Coil
100 Mm Or 200 Mm Extended Insulated Drain Pan In Gi/Ss
External Static Pressure Of 0,3,6 And 8 Mm
ALE PACKAGE
Additional Information: